| | |  | Lian-Li | Home » » » Swiftech H20-220 Ultima XT CPU liquid cooling kit | | | | | | | Description: | |
Swiftech H20-220 Ultima XT CPU liquid cooling kit
The H20-220 Ultima XT CPU liquid cooling kit continues our long established tradition of bundling our top performing components to produce the best cooling kit the market has to offer. A declination of this kit for complete system cooling is also available under the part number Apex Ultima Plus.
Featuring what many consider as the world's best water-block: the recently released Apogee XT, the MCRES-Micro Revision 2 , the classic MCP655-B pump and MCR220 dual 120mm radiator, the Ultima XT receives yet another quantum boost in both performance and versatility.
Whereas an increasing number of cases can now accommodate dual 120mm radiators internally, users convenience was not forgotten, and the Apex Ultima is shipped standard with our MCB120 "Radbox" Revision 2 which allows the radiator to be bolted-on at the back of practically any mid-or full tower cases. Overall thermal performance also clearly benefits from the use of our Radbox, as explained HERE, and demonstrated in a number of FIELD TESTS .
Platform Compatibility
All Intel® CoreTM Desktop processor family (CoreTM2, Quad, Duo, Extreme, i5, i7) in socket 775, 1156 and 1366 form factor.
Intel® Server processor family (XeonTM) in socket 603, 604 and 771 form factors (free hold-down plate sent factory-direct on demand worldwide - see details here)
AMD® processors in their respective socket form factors - 754, 939, F, AM2 and AM3 (free hold-down plate sent factory-direct on demand worldwide - see details here)
Additional Information from Swiftech
| | | Product Details: | | | Product Weight:
| 10.0 pounds | | Average Customer Rating:
|  based on 3 reviews |
| | | | Customer Reviews: | |
Average Customer Review:
Write an online review and share your thoughts with other customers.
 my first liquid cooling kitJul 04, 2010
gets the job done
few problems
1 instructions kinda confusing at first (for a noob like me)
2 make sure everything is tight meaning the clamps on the tubes use plyers to tighten if you have too
make sure the reservoir inlet and outlet are tighten (my mistake of not tightening the outlet cause a tiny tiny tiny drip to fall) the instructions say drill a hole here and there I didnt have to as shown on the pictures that i uploded.
but yeah great product buy more toobing if you have to you only get one shot with this.
planing to get the tubes that u can disconnect without draining the liquid
i7 960 3.2Ghz currently overclocked at 3.8GHz will get to 4.2 when i feel like it
1 of 1 found the following review helpful:
good qualityFeb 08, 2010
Parts are of the highest quality. Installation was moderately difficult due to unrelated pictures. Very important to mock up your particular system before cutting any hoses or making any holes in your case. Performance is solid: 30C idle and 45C Max load. I am running QX9650 @ 4ghz. Also cooling NB and sb chips w/bitspower.
1 of 2 found the following review helpful:
 1 major problem easy fixFeb 03, 2010
good cooling unit fits well in my case but one MAJOR problem when you install this make sure all your seals are tight on the little block that holds the water mine started a slow drip a day after i installed it i was lucky i keept my system open and look everthing over i would recomaned taking some apoxi from a hardware store and seal there and on the pump it self othere then that keeps my system nice and cool dose it job well
| | |
|
