| | |  | Coolerguys | Home » » » Coolerguys 110v AC to 12 / 5v DC 4pin Molex 2A Power Adapter | | | | | | | Description: | |
Coolerguys 110v AC to 12/5v DC adapter
Created, manufactured and sold by Coolerguys
We offer replacement warranty for 3 years if you buy direct
Great Adapter to Power your Entertainment Center Cooling or Lighting that runs on 12v. Standard 4 Pin Molex Connector.
Works internationally with AC power upto 240v if you adapt the plug. Comes stock with 2prong AC outlet plug
Made to work specifically with any of the Coolerguys made thermal control units (model #s 840556087243 & 840556090885) ASIN B002PNL0F4 & B001AS3328
4 pin Molex Adapter with 40" Power Lead
5 ft - 2 prong - 110V Power Cord
Model: SPP34-12.0/5.0-2000
Input: 100-240VAC 50/60Hz 1.5A
Output: 12V +- 2A / 5V+- 2A
Brick Dimensions: 114 x 47 x 32 mm
Cord Lenght: AC cord to brick 5ft, 4pin molex cord from brick 42"
UL - Listed
Picture may vary slightly due style type
ROHS
| | | Features: | |
• Made by Coolerguys.com, 3 year replacement warranty if you buy direct
• Input: 100-240VAC 50/60Hz 2A | Output: 12V +- 2A --- 5V+- 2A
• Made to work specifically with any of the Coolerguys made thermal control units
• Includes: AC to DC Adapter and 5ft power cord, 4 Pin Molex cord is 40" from Power Adapter
• Check out Thermal Control Units ASIN B002PNL0F4 & B001AS3328
| | | Product Details: | | | Product Length:
| 4.49 inches | | Product Width:
| 1.26 inches | | Product Height:
| 1.85 inches | | Product Weight:
| 1.2 pounds | | Package Length:
| 7.0 inches | | Package Width:
| 4.1 inches | | Package Height:
| 2.3 inches | | Package Weight:
| 0.7 pounds | | Average Customer Rating:
|  based on 16 reviews |
| | | | Customer Reviews: | |
Average Customer Review:
 ( 16 customer reviews )
Write an online review and share your thoughts with other customers.
Most Helpful Customer Reviews
6 of 6 found the following review helpful:
 Exactly what I needed for cabinet fansApr 10, 2011
By karmicscorpio
This power supply is exactly what I needed to run the two 120mm PC case fans I installed in my home theater cabinet where my receiver and cable box are installed (one for intake at the bottom and exhaust at the top). I plugged the power supply into the switched outlet on the receiver to ensure adequate cooling when it's running, no issues at all - I highly recommend it!
8 of 9 found the following review helpful:
 Simple Power SupplyOct 10, 2007
By C. Bollinger
My entertainment center is getting full of various A/V components and starting to heat up. I decided to cut a hole in the back of the cabinet to install a quiet PC fan for ventilation. I ordered this product to power the fan and it works like a charm.
2 of 2 found the following review helpful:
Powers HDD and FANSDec 12, 2011
By SpeedingCheetah
Finally found one of these that would power a hard drive AND fans. I have purchased different brands of this kind of power cord from online and physical stores, some coming with a usb to sat adapter. Most of the time, the power cord would only power an hdd, not a case fan, or any other molex device. Not sure why they do this, they all are rated the same...5v/12v 2amps...I bought a KGear branded one that powered hdd fine, but would barely spin a fan. THIS PRODUCT powers both perfectly.
1 of 1 found the following review helpful:
 A revised review of why I am now giving this 2 stars instead of my previous 5 out of 5Oct 14, 2011
By Expendable
I must update and revise my review for this product. I recently bought another one of these adapters (late April), but they have changed them within the past year. They took away the ground wire and the molex wire also appears to be a little thicker (or the protective casing around the wires just may be thicker). Why did they change it, i will never know and this new adapter that I bought couldn't even handle 2 of my cold cathodes without the brick running hot. Also, the sound activation that these cathodes have would not even work properly when connected to this adapter.
My older adapter that I bought in October of 2011 works great and I have no complaints about it. Since this new adapter that I bought could not withstand or operate my cathodes properly, I am now forced to connect all of my cathodes up to my old adapter and guess what, THAT OLD ADAPTER SUPPORTS ALL 6 CATHODES AND THE BRICK RUNS COOL!
Here is what I wrote about the first adapter that I bought, but with the experience of this defective product, it is nullified:
""I bought this for wiring cathodes behind my monitors. Man, was it worth it! This little adapter certainly did its job with little ease. I have 4 Logisys 15" cold cathodes (sound activated) hooked up to this adapter and I know it most likely can do more.
The only problem I found is that it maybe could have a power switch on it (as many other people have stated too). But all in all, it is a sturdy and great product all around!""
1 of 1 found the following review helpful:
 4 pin molex power supplySep 03, 2010
By David P. Craft
CG 110v AC to 12v DC 4pin molex Power Adapter would be a better product with an on off switch
See all 16 customer reviews on Amazon.com
| | |
|
